They haven't been doing anything with it. It needs a face lift and a few (ok a lot) of bugs fixed. I have a hard time even looking up the things I posted my self. It needs work, they know it, and choose to ignore it. They had a good thing going but dropped the ball!
Some things are meant to be closed. Your mind isn't one of them.
They haven't been doing anything with it. It needs a face lift and a few (ok a lot) of bugs fixed. I have a hard time even looking up the things I posted my self. It needs work, they know it, and choose to ignore it. They had a good thing going but dropped the ball!
Post by jimustanguitar on Jul 7, 2015 8:29:39 GMT -5
I had a glitch the other day that I texted John about, and he sent me to Evan. I guess it's entirely his and SeeMe doesn't do much more than use it like we do anymore...
YouMagine and PinShape have much better intellectual property policies than Thingiverse, but they don't get as much traffic.
Iirc repables was 100% coded by Evan and Evan is working on other things, such as a basic DLP software to use Slic3r exported image layers as a replacement for Creation Workshop.
We was supposed to release the source last week but afaik he hasn't.
The Problem with Pipe clamps is if your not careful the clamp can put uneven pressure on the two pieces of wood and cause a canter. These little clips help support the piece so it is more in line with the pressure of the screw.
Last Edit: Dec 29, 2016 13:55:04 GMT -5 by BeeAmaker
Some things are meant to be closed. Your mind isn't one of them.
Post by bvandiepenbos on Feb 21, 2017 20:04:08 GMT -5
Bracket I designed to hold the Fog Buster cutting fluid mister on my Bridgeport CNC mill. Clamps onto the quill so it follows tool up & down so mist stays right on tool. It was mounted on head so it did not move with tool. I really enjoy designing/drawing in Fusion 360.
I made a cover to protect my new Carbide Tool we made with the Mill. It snaps onto the bar and I can pull it down to the handle so it is out of the way and then push it back up with my thump to cover the blade, keeping it safe.
Last Edit: Feb 21, 2017 22:05:10 GMT -5 by BeeAmaker
Some things are meant to be closed. Your mind isn't one of them.
I bought a solder paste dispenser, hopefully to make it easier to do SMD work my tank system boards. However it only came with one size syringe for dispensing. I needed something smaller so I drew my own and printed it.
Some things are meant to be closed. Your mind isn't one of them.