Hay everyone, one of our members, Roy is trying to build a MilkRap 3D printer but has no printer to print the STL files. I don't know which files he needs for sure or how many of each but If everyone here that has a 3D printer grabs a few files and prints them and brings them to the MakerHive, Roy can probably get all the parts he needs to build his MilkRap. Use your judgment on quantity. Things like spacers or washers he will probably need multiples of. Rod ends and things like that probably 2 of each. Motor mounts at least 4. etc etc....
Download the STLs here. reply to this post and tell us which files you are going to print so others don't duplicate. I would recommend PLA so you don't have to work around many warping issues, but I'm sure ABS will be just fine too. Color is up to you. (I'm sure Roy would enjoy Hot Pink )
Printing: 5_16x1 inch x 3_16 thick washer Qty 10, if all goes well.
EDIT - Also Printing: Big Washer Qty 9 EndStop Switch Holder Qty 3 Nubbin_Belt base Qty 6 Nubbin_Belt top ribbed _Xtra Crazy Nubbin_Belt top ribbed Nubbin_Bowden1 Nubbin_Bowden2 Nubbin_Bowden3 Nubs Rod to Motor Clamp x4 Rod to Motor Clamp2 x4 LM8UU Linear Bearing Holder_w_Tabs x4 X Axis Motor Tower_FU x2 X Axis Bearing Tower Arm x2 Y End Stop Holder x2 Y Motor Mount_FU x2 Y Motor Mount x1