Personally I think this is a very crappy model. Is there anyone that could possibly make a better looking Boris? Even just 3D printed, this model does not do it BeagleBone justice.
Last Edit: Apr 6, 2019 7:20:06 GMT -5 by BeeAmaker
Some things are meant to be closed. Your mind isn't one of them.
Post by sbassinvader on Apr 5, 2019 9:36:05 GMT -5
I'm not so much a fan of the model, i say it's good enough for a test drive though. If your media is in a collet it has to fit within the confines of the stock dimensions and simplicity is usually good to start with. i do agree though for a rockstar level machine this is like playing at the county fair.
I can get one of these at MSC pretty cheap, or i have a 3x1 bar we can pull a chunk off.
No worries, i have a few things in the works that would be amazing to have a 5 axis CNC for. The question i have is how many videos do we have to make to get to keep it?
Do you have delrin or HDPE rods or blocks? I'm working on getting a vise that mounts to the table as well so we can do 2x2 blocks. But lets start with plastics first until we actually know what we are doing www.mscdirect.com/product/details/63383319
Might be a bit more expensive, but way cheaper than crashing the machine.
Also if you can check pricing for 1/16" an 1/8" ball end mills, 1/8" shank. They are probably cheep enough if you just want to pick a couple of each up I will pay you for them.
Thanks
Some things are meant to be closed. Your mind isn't one of them.