Auto Bed leveling

[BeeAmaker]

I wonder if this will work with Repitier.

hackaday.com/2014/03/19/ask-hackaday-auto-bed-leveling-and-high-temperature-force-sensitive-resistors/

[jimustanguitar]

The current concensus is that this works, but only with Marlin firmware. Repetier is definitely next though.

John Stack offered a $100 bounty for the first person that makes this work. Hopefully it's coming soon!

[BeeAmaker]

One issue noted on the SeeME fourms is the fact that it won't work with a heated bed as the force sensors can't handle the heat. So they would need to be installed in a fashion that is away from the heated bed and not directly underneath it.

[ZionPhil]

someone posted an idea of AeroGel between the sensor and bed. Small amount wouldn't be over expensive.