Slicer Settings Apr 3, 2014 20:53:15 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by BeeAmaker on Apr 3, 2014 20:53:15 GMT -5 What does everyone (that uses Repitier) have for the "Advanced" settings?
Slicer Settings Apr 4, 2014 10:22:41 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by ZionPhil on Apr 4, 2014 10:22:41 GMT -5 FOR .35 NOZZLEMy settings for 1st layer will range from .43 to .58 depending on what I am printing. Mostly set at .52 or .53FOR .5 NOZZLE I WOULD DO .6 ALL THE WAY THROUGH
Slicer Settings Apr 4, 2014 15:30:49 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by navkram on Apr 4, 2014 15:30:49 GMT -5 mine are all set to .6 on the orion, works for me.....
Slicer Settings Apr 4, 2014 15:39:07 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by bvandiepenbos on Apr 4, 2014 15:39:07 GMT -5 of course, it depends on nozzle size.what size is yours Glenn?
Slicer Settings Apr 4, 2014 16:06:21 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by BeeAmaker on Apr 4, 2014 16:06:21 GMT -5 Apr 4, 2014 15:39:07 GMT -5 bvandiepenbos said:of course, it depends on nozzle size.what size is yours Glenn?0.5mm
Slicer Settings Apr 4, 2014 16:32:10 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by bvandiepenbos on Apr 4, 2014 16:32:10 GMT -5 try starting with all at same size as nozzle then adjust each from there if needed.oh, also bed adhesion is helped by making first layer thicker... if I am printing at .2 layers I set 1st layer to .3
Slicer Settings Apr 4, 2014 17:16:58 GMT -5 Quote Select PostDeselect PostLink to PostMemberGive GiftBack to Top Post by BeeAmaker on Apr 4, 2014 17:16:58 GMT -5 Apr 4, 2014 16:32:10 GMT -5 bvandiepenbos said:try starting with all at same size as nozzle then adjust each from there if needed.oh, also bed adhesion is helped by making first layer thicker... if I am printing at .2 layers I set 1st layer to .3Yaeh that's what I got.
