Features Include: * A Single 12 pin connector for harness connection to the 3D printer. * A JST connector for easy connection for 2 fans and an LED (or other use) * A JST connection for the Temp sensor. * Top hotend LED to indicate hotend is heating * Provides connection for a 30mm Fan using M3 screws right to the board. * Allows you to quickly change hot ends if one fails, or for switching to different Material or nozzle size. * Groove mount compatible * Includes screws for groove mount top (Down load STL groove mount clamp here)
Assembly Instructions Part 1, Soldering the Plate (Out dated, reference only, please refer to version 2)
Assembly Instructions Part 1, Soldering the Plate for VERSION 2 boards
Assembly Instructions Part 2, Attaching to the Hotend
Key Features * Improved layout design to reduce the chance of shorting terminals * Added FAN ON indication LEDs * Made it possible to use standard JST connectors, or the new plugable no-crimp connectors.Also possible to use standard header pins * Able to distribute power to the Light ring below, and/or power to the Top Hat LED above without added wires. * NEW yellow silk screen. Makes your Delta print up to 0% Faster than before!!
Kits will be available at MRRF and on line shortly after.
Last Edit: Mar 18, 2015 11:09:56 GMT -5 by BeeAmaker
Some things are meant to be closed. Your mind isn't one of them.
Version 3, that corrects the miss aligned hole, should be here in about 2 weeks. If you purchased a misaligned board I will be offering discounts when they arrive.
Some things are meant to be closed. Your mind isn't one of them.